WEROTEX

Compound properties:
• Less hickey (dirt) development on the printing plate (especially valid for "cheap" dusty paper in the printing
   of cardboards).
• A homogeneous cover (no fibre adhesive tape)
• The roller is normally cleaned during the usual cleaning process
• The roller should be used as the second ink form roller to avoid the eventual formation of structure by the
   fibre.

User Area:
• Ink form roller for conventional sheet-fed offset

Printing Area :
• Sheet-fed printing
• Heat-set printing

Maintenance:
• All Fogra approved standard conventional cleaners for normal wash up
• Use a “deglazer” at least 1 time per month
• In case of running without inks : Use a roller oil for protection
• Clean the fibre by hand wash up with soft brush at least all 3 months